Analisis Besar Medan Magnet Solenoida Menggunakan Simulasi Virtual Laboratorium Explerify
Abstract
This study aims to analyze the magnitude of the magnetic field in a solenoid using the Explerify virtual laboratory simulation. The study was conducted with a quantitative approach by varying the number of turns (N) and electric current (I), while the coil radius (r) was kept constant at 0.015 m. The simulation results show that the magnetic field increases linearly with increasing number of turns, in accordance with Ampère's Law theory. Comparison between the simulation results and theoretical calculations shows an average difference of around 11–12%. This difference is thought to be caused by parameter limitations in the simulator, especially the length of the solenoid (L), as well as the influence of end effects that are not taken into account in ideal theoretical calculations. Thus, the results of this study indicate that the Explerify virtual laboratory can be an effective alternative for quantitative analysis.
References
Dewa, E., Ursula, M., Mukin, J., & Pandango, O. (2020). Pengaruh Pembelajaran Daring Berbantuan Laboratorium Virtual Terhadap Minat dan Hasil Belajar Kognitif Fisika. JARTIKA) |, 3(2), 351–359. https://journal.rekarta.co.id/index.php/jartika/article/view/363
Giancoli, D. C. (2001). Fisika Jilid 2. Jakarta: Erlangga.
Muddasir, F., & Khotimah, S. N. (2025). Simulasi Numerik Distribusi Medan Magnet Aksial dan Radial pada Solenoida Berhingga Berbasis MATLAB. Jurnal sosial dan sains, 5(6), 1603–1613. https://doi.org/10.59188/jurnalsosains.v5i6.32267
Pangestika Fajrin, V., Ruhiat, Y., & Darman, D. R. (2021). PENGEMBANGAN ALAT PERAGA FISIKA CRANE MAGNETIC POKOK BAHASAN MEDAN MAGNET PADA SELENOIDA. Riset Ilmiah Pendidikan Fisika, 2(1), 1–6. https://doi.org/10.31851/luminous.v2i1.5134
Prastyaningrum, I., & Imansari, N. (2023). Medan Elektromagnetik. UNIPMA Press Universitas PGRI Madiun.
Putri, H. V., Radiyono, Y., & Setiawan, I. B. (2022). Pengembangan Alat Percobaan Induksi Magnetik Pada Kawat Melingkar Berarus dengan Hall Effect Sensor UGN3503. Jurnal Materi dan Pembelajaran Fisika, 12(1), 44. https://doi.org/10.20961/jmpf.v12i1.61193
Santoso, P. T., & Irawan, D. (2024). Rancang Bangun Alat Otomatisasi Pengereman Kendaraan Bermotor Berbasis Fuzzy Logic. E-Link: Jurnal Teknik Elektro dan Informatika, 19(2), 225. https://doi.org/10.30587/e-link.v19i2.8267
Sarah, L. L., & Suwarma, I. R. (2022). FISIKA. Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi. https://buku.kemdikbud.go.id
Susilo, S., Yusuf, Y., Ula, S., Hermawan, B. A., & Ghifari, M. R. (2021). Pengaruh Variasi Diameter dan Jumlah Lilitan Tembaga terhadap Tegangan Listrik yang Dihasilkan pada Alat Peredam Kejut Regeneratif Skala Laboratorium. J-Proteksion, 5(2), 25–31. https://doi.org/10.32528/jp.v5i2.4356
Waruwu, L. Y., Rahmi, A., & Anaperta, M. (2021). Rancang Bangun Alat Ukur Medan Magnet Berbasis Arduino Uno Menggunakan Sensor Efek Hall. Semesta Teknika, 24(2), 129–139. https://doi.org/10.18196/st.v24i2.12938
